This work covers hanging new drywall, patching holes and cracks, cutting out and replacing water-damaged sections, and blending the repair back into the surrounding texture so it does not stand out. Most jobs are one of two things: a clean install on new framing, or a repair where the hard part is matching what is already on your wall. The mudding, sanding, and texture work is where a job is won or lost, not the hanging.
Humidity is the whole story with drywall in Acadiana. Gypsum board and the paper facing on it pull moisture out of the air, and in a Lafayette summer that means a patch can sit soft, mold can start behind the paper, and joint compound takes longer to dry before it can be sanded. If your damage came from a roof leak, a slab issue, or standing water after a storm, the drywall is often the messenger, not the problem, so the source has to be found and stopped first or you will be patching the same spot next year. Homes around Broussard, Youngsville, and Scott on slab foundations also see cracking at door and window corners as the clay soil under them swells and shrinks through wet and dry spells, and near the ground, termites and moisture can chew up the paper and the framing behind it. In bathrooms, laundry rooms, and anywhere near plumbing, the right board matters, moisture-resistant or cement board instead of standard sheet.
A homeowner can reasonably handle a small hole, a popped nail, or a hairline crack with a patch kit, some joint compound, and patience. Where people get into trouble is the finishing, because a rushed or lumpy mud job and a texture that does not match will show under every light in the room, and it is harder to fix than to do right the first time. You should not do it yourself if the drywall is wet or you suspect mold, if the damage is on a ceiling, or if you cannot find and stop the water source, since those involve health, structure, and the risk of doing the whole job twice. When in doubt, the safe line is that you can do cosmetic, and you should hand off anything involving water, height, or a texture you cannot match.
Every question is optional. The more you answer the faster somebody can come back with a real number, and the better we can match you to the right person, but a name and a number is enough to get started.
As much detail as you feel like giving, as little as you have to. A photo helps most.
16 businesses near you, ordered by their Google rating. Nobody paid to be here.
Ratings and review counts come from Google and were pulled on 15 August 2026. Businesses are listed because they serve Lafayette, not because they paid: nobody on this page has bought their position, and we have not inspected anyone's work. Call and ask for references the same way you would anyway.
Sometimes, if it was a small amount of clean water and the board dried fully and stayed firm. But if the drywall is soft, stained, or smells musty, drying and painting only hides the problem, and mold can keep growing behind the paper. The safe move is to cut out the wet section, confirm the framing behind it is dry, and replace it.
Recurring cracks, especially at door and window corners, usually come from the house moving, which is common on slab foundations over the clay soil around Lafayette as it swells and dries out with the seasons. Filling the crack treats the symptom, not the movement. It can still be made to look right, but ask that the repair be done in a way that allows for some flex, and keep an eye on whether it is getting worse.
The hanging and first coat of mud can go fast, but each coat of joint compound needs to dry before the next, and in Lafayette humidity that drying is slower. A typical patch runs across a couple of days once you count multiple coats, sanding, and priming. Rushing it is the main reason a repair ends up looking bad.
Yes. Standard drywall soaks up moisture and breaks down over time in wet rooms. Moisture-resistant board is the minimum in those spaces, and areas that get direct water, like a shower surround, call for cement board or a similar backer. It is worth confirming what your installer plans to use before the work starts.
Gerry is an A.I. assistant. He can point you at a trade and take your details, and a person handles the work.